Commit 9840b642 authored by Sven Greiner's avatar Sven Greiner

Fix #7: Switch battcheck and beacon mode

parent 2e9f71f1
......@@ -54,7 +54,7 @@ Turn the light on, it starts with a fixed output level. Tap the button to switch
### Battery check
Tap five times to enter battery check mode. The flashlight starts blinking one to four times. The number of flashes corresponds to the remaining capacity / current voltage:
Tap six times to enter battery check mode. The flashlight starts blinking one to four times. The number of flashes corresponds to the remaining capacity / current voltage:
- 4 flashes: above 4.0 V (75%)
- 3 flashes: above 3.8 V (50%)
......@@ -66,7 +66,7 @@ Tap again to return to normal flashlight mode.
### Beacon mode
Tap six times to enter beacon mode. In this mode the flashlights runs at low intensity and flashes every two seconds. Tap again to return to normal flashlight mode.
Tap five times to enter beacon mode. In this mode the flashlights runs at low intensity and flashes every two seconds. Tap again to return to normal flashlight mode.
### Strobe mode
......
......@@ -57,8 +57,8 @@
#define EEPROM_OUTPUT_WL_BYTES 16
#define TURBO_PRESSES 2
#define BATTCHECK_PRESSES FIXED_SIZE+1
#define BEACON_PRESSES FIXED_SIZE+2
#define BEACON_PRESSES 5
#define BATTCHECK_PRESSES 6
#define CONFIG_PRESSES 10
/**
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment